BNC Connectors The BNC coaxial connector, a widely used connector, was developed in the 1940s. The name “BNC” is derived from “Bayonet-Neill-Concelman,” with “Bayonet” referring to the bayonet-style connection method, and “Neill” and “Concelman” being the inventors of the N-type and C-type connectors, respectively. The BNC connector is essentially a compact version of the C-type […]
04
Sep
Sep
The coaxial line represents the most effective way to transmit the signal from the source to the terminal, which is embodied in the coaxial cable assembly. The distance between the source and the terminal is the length of the cable. The most important factor in choosing a radio frequency coaxial connector is the choice. Cables, […]
01
Sep
Sep
Classification and application of radio frequency coaxial connectors: RF coaxial connectors are divided into 4 categories according to their dimensions: standard, miniature, sub-miniature and micro-miniature. This category reflects coaxial connectors The history of development. The early coaxial cables were much larger than the commonly used coaxial cables. Therefore, the early RF coaxial connectors were very […]
01
Sep
Sep
一、 The radio frequency coaxial connector is divided into: according to the connection interface structure Bayonet type (internal bayonet, external bayonet): BNC; Thread type (right-hand thread, left-hand thread): L29 (7/16), N, F, TNC, SMA, SMC, SSMA, SSMB, FME, L9 (1.6/5.6), 7mm, 3.5mm, 2.4mm , K (2.92mm), 1.85mm, 1mm; Push-in (in-line, self-locking): SMB, SSMB, MCX, MMCX, SMP, […]
31
Aug
Aug
RF coaxial connectors must not only realize the mechanical connection between the transmission lines, but also complete the task of transmitting as much high-frequency electromagnetic energy as possible. The materials and mechanical dimensions used in the connector design have an impact on the high-frequency transmission performance. Almost all have a certain influence, especially the internal […]
RF Connectors, Product News
The status quo and problems of China’s radio frequency coaxial connector industry
31
Aug
Aug
China began to develop and produce RF connectors by complete machine factories in the 1960s. Production began in the 1970s by professional manufacturers. Before the 1980s, it was based on the principle of self-reliance and mainly imitated Soviet products. Since the 1980s, international standards have been adopted to develop and produce international general-purpose products, mainly […]
31
Aug
Aug
The radio frequency coaxial connector is a general term for the connector used in the radio frequency coaxial feeder system. The connector is used to connect the radio frequency coaxial cable in the radio frequency transmission line used in communication and electronic equipment and similar electronic equipment. Or the connection between coaxial and microstrip, coaxial […]
27
Aug
Aug
What is a radio frequency coaxial connector Radio frequency coaxial connectors (also called radio frequency connectors or RF connectors, in fact, strictly speaking, radio frequency connectors are not completely equivalent to coaxial connectors. Radio frequency connectors are classified from the perspective of the frequency of use of the connector. Shaft connectors are classified from […]
26
Jul
Jul
The RF connector interface is a radio frequency interface. The RF interface is a radio frequency interface. It is the interface mode adopted by the current family cable television. The principle of RF imaging is to mix and encode video signals (CVBS) and audio signals (Audio), and then perform a series of separation/decoding processes inside […]
26
Jul
Jul
1. Three highs High precision, high efficiency, high gain The most important task of using SMC to manufacture antennas is to give full play to its characteristics in product design and process production and to meet the requirements of antenna type high precision. In the mold size design, the shrinkage rate of the material and […]